Rear Door Inner Belt Weatherstrip: Removal

1. Remove door trim panel.
2. Remove inner belt weatherstrip from door. If necessary, use a rubber mallet and a block of wood, tapping upward at each clip attaching the molding to the door. See Fig 1.

Fig 1: REAR DOOR WEATHERSTRIP

Courtesy of DAIMLERCHRYSLER CORP.

1 - REAR DOOR OUTER BELT WEATHERSTRIP	6 - REAR DOOR LATCH STRIKER
2 - REAR DOOR GLASS RUN WEATHERSTRIP	7 - REAR DOOR CHECK STRAP AND COVER
3 - REAR DOOR GLASS LOWER CHANNEL REAR	8 - REAR DOOR CHECK STRAP SEAL
4 - REAR DOOR	9 - REAR DOOR GLASS LOWER CHANNEL FRONT
5 - REAR DOOR LATCH STRIKER SPACER	10 - REAR DOOR INNER BELT WEATHERSTRIP