Sunroof Trough Guide Assembly: Removal

Remove the sunroof glass panel (Refer to BODY/SUNROOF/GLASS PANEL - REMOVAL) .
Place sunroof into the vent position.
Remove screws from the trough assembly one on each side. See Figure.
Remove trough.
Disconnect the guide link. See Fig 1.
Slide trough guide forward and disengage the sliders through the notches in guide channels. See Fig 2.

Fig 1: TROUGH GUIDES

Courtesy of DAIMLERCHRYSLER CORP.

1 - TROUGH GUIDE

2 - GUIDE LINK

Fig 2: TROUGH GUIDE REMOVAL

Courtesy of DAIMLERCHRYSLER CORP.

1 - TROUGH GUIDE

2 - NOTCH

3 - SLIDER