LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Sunroof >> Sunroof Sunshade >> Removal

Sunroof Sunshade: Removal

  1. Remove sunroof glass panel (Refer to BODY/SUNROOF/GLASS PANEL - REMOVAL) .
  2. From the top of the vehicle through the roof opening remove the two screws (one LH and one RH side) attaching trough assembly to trough guides. See Fig 1.
    Fig 1: GUIDE ASSEMBLY TROUGH
    GC0022587Courtesy of DAIMLERCHRYSLER CORP.
    1 - TROUGH
    2 - TROUGH GUIDE
    3 - SCREW
  3. Remove trough assembly.
  4. From the top of the vehicle through roof opening slide the sunshade forward, disengaging sunshade front guide feet through front opening in tracks.
  5. Continue to pull the sunshade forward and rotate sunshade until rear guide feet are disengaged from tracks and sunshade is completely free from the sunroof assembly.
CAUTION: Use care not to crease the sunshade when removing or installing.