LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Seats >> Rear Seat >> Removal >> Removal - Pt-27 Only

Removal - Pt-27 Only

  1. Fold rear seats forward and remove screw attaching check strap. on each side of vehicle. See Fig 1.
    Fig 1: CHECK STRAP
    GC0022409Courtesy of DAIMLERCHRYSLER CORP.
    1 - CHECK STRAP
    2 - ATTACHING SCREW
  2. Remove latch covers. (Refer to BODY/SEATS/REAR SEAT LATCH COVERS - REMOVAL) .
  3. Fold seat back down and then roll forward to access rear seat latch latching devises. See Fig 2.
    Fig 2: PT-27 SEAT LATCH AND LATCHING DEVICE
    GC0022513Courtesy of DAIMLERCHRYSLER CORP.
    1 - LATCHING DEVICE
  4. To disengage latching devise, rock latching devise rearward and install a rod into the hole to support latching devise in the open position. See Fig 3.
    Fig 3: PT-27 SEAT LATCH
    GC0022512Courtesy of DAIMLERCHRYSLER CORP.
    1 - ROD
  5. With both latches in the open position the seat may be removed. See Fig 4.
    Fig 4: REAR SEAT LATCHES
    GC0022514Courtesy of DAIMLERCHRYSLER CORP.
    1 - LATCH(S)
  6. Remove latches, if necessary. Remove attaching bolts and remove latch. See Fig 5.
Fig 5: LATCHES
GC0022515Courtesy of DAIMLERCHRYSLER CORP.
1 - REAR FLOOR PAN
2 - REAR SEAT LATCH(S)
3 - ATTACHING BOLTS