Rear Seat Bolster Cover - Pt-27: Removal

1. Remove rear seat bolster from vehicle. (Refer to BODY/SEATS/REAR SEAT BOLSTER - REMOVAL) .
2. Remove the two bolster mounting brackets. See Fig 1.
3. Remove push pin fasteners from upper retainer.
4. Cut three hog rings attaching cover together. See Fig 2.
5. Remove cover from foam.

Fig 1: BOLSTER - MOUNTING BRACKET

Courtesy of DAIMLERCHRYSLER CORP.

Fig 2: BOLSTER COVER

Courtesy of DAIMLERCHRYSLER CORP.

1 - HOG RINGS