LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Seats >> Rear Seat Back Cushion Cover/Foam - Pt-27 >> Removal >> Removal - Pt-27 Only

Removal - Pt-27 Only

  1. Remove seat from vehicle. (Refer to BODY/SEATS/REAR SEAT - REMOVAL) .
  2. Remove seat back. (Refer to BODY/SEATS/REAR SEAT BACK - REMOVAL) .
  3. Disengage J-strap attaching seat cover from the seat cushion frame.
  4. Pull cover off to the hog rings. See Fig 1.
  5. Cut hog rings attaching seat cover to seat cushion pad.
  6. Remove seat cushion cover and foam from seat cushion frame. See Fig 2.
Fig 1: HOOK & LOOP, & HOG RINGS
GC0022550Courtesy of DAIMLERCHRYSLER CORP.
1 - HOOK AND LOOP
2 - HOG RINGS
Fig 2: REAR SEAT CUSHION FRAME
GC0022549Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals