Front Seat Cushion: Removal: Notes

Remove seat from vehicle.
Remove upper riser shield, if equipped.
Remove the seat back recliner handle/fold flat handle and front seat cushion shield Disconnect wire connectors, if equipped. See Fig 1.

Fig 1: SEAT SIDE SHIELD - OUTBOARD
Courtesy of DAIMLERCHRYSLER CORP.

1 - ATTACHING SCREWS
Remove front inner seat belt attaching screw and inboard seat side shield. See Fig 2.

Fig 2: SEAT SIDE SHIELD - INBOARD
Courtesy of DAIMLERCHRYSLER CORP.

1 - FRONT INNER SEAT BELT ATTACHING SCREW

2 - SHIELD ATTACHING SCREWS
Remove front seat cushion screws, two front side and two rear. See Fig 3 and Fig 4.

Fig 3: FRONT SIDE ATTACHING SCREW & FRONT CUSHION
Courtesy of DAIMLERCHRYSLER CORP.

1 - FRONT SIDE ATTACHING SCREW

2 - FRONT SEAT CUSHION

Fig 4: REAR ATTACHING SCREW - FRONT SEAT CUSHION
Courtesy of DAIMLERCHRYSLER CORP.

1 - REAR ATTACHING SCREW

2 - FRONT SEAT CUSHION
Disconnect any electrical connectors and wire ties from the bottom of seat cushion, if equipped.
Remove track and recliner assembly.
Remove seat cushion from seat frame. See Fig 5.

Fig 5: Front Seat Cushion

Courtesy of DAIMLERCHRYSLER CORP.

1 - FRONT SEAT CUSHION