LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Quarter Glass - Pt-27 >> Installation

Quarter Glass - Pt-27: Installation

  1. Raise glass lift channel to full up position.
  2. Position quarter glass on quarter window module. See Figure.
  3. Loosely install fasteners holding quarter glass to quarter window module.
  4. Lower convertible top.
  5. Lower quarter window module into position through opening in top of quarter panel.
  6. Install fasteners holding quarter window module to inner quarter panel.
  7. Connect wire connector to power window motor.
  8. Adjust quarter glass as necessary (Refer to BODY/ADJUSTABLE QUARTER GLASS - ADJUSTMENTS) .
  9. Install water dam. (Refer to BODY/DOOR - FRONT/WATER DAM - INSTALLATION) .
  10. Install quarter trim panel. (Refer to BODY/INTERIOR/QUARTER PANEL TRIM - INSTALLATION) .
scientia non olet · About LEMON Manuals