Wood Grain/Flame Decals: Removal

Using a grease pencil or equivalent, mark the location of the decals to aid installation.
Using a heat gun, gently apply heat in a circular motion to loosen the adhesive bond.
Using your fingernail, plastic or wood trim stick, lift up and peel away the decal from the body panel applying heat as you go. See Fig 1 or Fig 2.
Clean off all traces of adhesive from the panel(s) with a general purpose adhesive remover.

Fig 1: WOOD GRAIN OVERLAYS AND MOLDINGS

Courtesy of DAIMLERCHRYSLER CORP.

1 - LIFTGATE OVERLAY

2 - REAR DOOR OVERLAY

3 - FRONT DOOR OVERLAY

4 - FRONT FENDER MOLDING

5 - FRONT DOOR MOLDING

6 - REAR DOOR MOLDING

7 - FUEL FILLER DOOR MOLDING

8 - QUARTER PANEL OVERLAY

9 - QUARTER PANEL MOLDING

10 - LIFTGATE MOLDING

Fig 2: FLAME DECALS

Courtesy of DAIMLERCHRYSLER CORP.

1 - FRONT FENDER DECAL

2 - HOOD DECAL

3 - A-PILLAR DECAL

4 - REAR FENDER DECAL

5 - FRONT DOOR DECAL