Front Side Rail Access Pulley Splash Shield: Removal

1. Hoist and support vehicle on safety stands.
2. Remove front wheel.
3. Remove fasteners attaching lower fascia and air dam. Pull fascia forward to access fastener attaching front edge of the splash shield.
4. Remove push-in fasteners attaching side rail access pulley splash shield to frame rail forward of suspension. See Fig 1.
5. Remove side rail access pulley splash shield from vehicle.

Fig 1: FRONT SIDE RAIL ACCESS PULLEY SPLASH SHIELD

Courtesy of DAIMLERCHRYSLER CORP.

1 - FRONT FENDER

2 - FRONT SIDE RAIL ACCESS PULLEY SPLASH SHIELD