DECKLID Lock Cylinder - Pt-27: Removal

Release decklid latch and open decklid.
Remove decklid trim panel. (Refer to BODY/DECKLID/DECKLID TRIM PANEL - REMOVAL) .
Disconnect lock assembly wire harness from decklid wire harness.
Disconnect cylinder link by unsnapping the retainer clip and rolling it clear of link.
Remove lock cylinder clip from lock assembly. See Fig 1.
Remove lock cylinder assembly from decklid.

Fig 1: DECKLID LOCK ASSEMBLY

Courtesy of DAIMLERCHRYSLER CORP.

1 - LOCK CYLINDER LINK

2 - LOCK CYLINDER RETAINER

3 - DECKLID LOCK ASSEMBLY

4 - LOCK CYLINDER GASKET

5 - DECKLID

6 - DECKLID LATCH ASSEMBLY

7 - ATTACHING SCREWS