DECKLID Handle - Pt-27: Removal

Release decklid latch and open decklid.
Remove decklid trim panel. (Refer to BODY/DECKLID/DECKLID TRIM PANEL - REMOVAL) .
Disconnect cylinder link and handle to latch link by unsnapping the retainer clip and rolling it clear of link.
Remove the emblem spring nuts. See Fig 1.
Remove the handle attaching nuts.
Remove handle from decklid.

Fig 1: DECKLID

Courtesy of DAIMLERCHRYSLER CORP.

1 - DECKLID EMBLEM SPRING NUT(S)

2 - DECKLID OUTSIDE CHROME HANDLE

3 - DECKLID

4 - DECKLID OUTSIDE BEZEL

5 - DECKLID HANDLE ATTACHING NUT(S)