Seat Cushion: Removal

Fig 1: Removing/Installing Front Seat-To-Frame Bolt

Courtesy of DAIMLERCHRYSLER CORP.

Remove the seat. (Refer to BODY/SEATS/SEAT - REMOVAL) .
Remove the bolt (2) on the front seat (1) to the frame (3).

Fig 2: Removing/Installing Panel
Courtesy of DAIMLERCHRYSLER CORP.
Remove the panel (2).

Fig 3: Removing/Installing Expanding Anchors
Courtesy of DAIMLERCHRYSLER CORP.
Pull the two expanding anchors (2) out of the front left and right bearing brackets (1).

Fig 4: Removing/Installing Bearing Brackets
Courtesy of DAIMLERCHRYSLER CORP.
Remove the bearing brackets (1) from the seat cushion (2).

Fig 5: Identifying Springs & Seat Frame
Courtesy of DAIMLERCHRYSLER CORP.
Disconnect the heated seat cushion from the 4-pin connector.
Lift the seat cushion at the front and remove from seat frame (2), then remove the two springs (1) on the rear of the seat frame.