LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire SRT-6, 2D Coupe >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior (Service Information) >> Hood >> Gas Prop >> Removal

Gas Prop: Removal

Fig 1: Removing/Installing Gas Prop Components
GC0033239Courtesy of DAIMLERCHRYSLER CORP.
  1. Open the hood.
  2. Support the hood with a suitable prop device.
  3. Remove the gas prop lock (1) on the upper end (2).
    Fig 2: Identifying Gas Prop Lock & Lower End
    GC0033238Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the gas prop lock (1) on the lower end (2).
  5. Remove gas prop from vehicle.
scientia non olet · About LEMON Manuals