LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire SRT-6, 2D Coupe >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior (Service Information) >> DECKLID/Liftgate >> Gas Prop >> Removal

Gas Prop: Removal

Fig 1: Identifying Gas Prop Lock Cap & Gas Prop
GC0033152Courtesy of DAIMLERCHRYSLER CORP.
  1. Open the rear liftgate.
  2. Support the liftgate with a suitable propping device.
  3. Remove the gas prop lock cap (1) on the upper end. Then pull the gas prop (2) off of its mounting point.
    Fig 2: Removing/Installing Gas Prop
    GC0033151Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the gas prop lock cap (1) on the lower end. Then pull the gas prop (2) off of its mounting point.
scientia non olet · About LEMON Manuals