LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire SRT-6, 2D Coupe >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster - Electrical Diagnostics >> DTC Troubleshooting >> No Communication From Instrument Cluster >> When Monitored and Set Condition

When Monitored and Set Condition

  1. When Monitored: With the ignition on.
  2. Set Condition: Serial Communication K1 failure between the A/C Heater Control Module and the Instrument Cluster.
POSSIBLE CAUSES 
SERIAL COMMUNICATION K1 CIRCUIT OPEN
INSTRUMENT CLUSTER

For a complete Instrument Cluster Circuit Diagram, (Refer to ELECTRICAL/INSTRUMENT CLUSTER - SCHEMATICS AND DIAGRAMS) .

scientia non olet · About LEMON Manuals