Resetting The FSS Maintenance Indicator After An Oil Change

Fig 1: Identifying Ignition Switch Positions

Courtesy of DAIMLERCHRYSLER CORP.

1. Move the ignition switch to the "RUN" position (3).
   Fig 2: Identifying Instrument Cluster Gauges And Control Dials

   Courtesy of DAIMLERCHRYSLER CORP.
2. Within 4 seconds of moving the ignition switch into the "RUN" position, press the reset button for the trip odometer (3) twice within one second. The display for the FSS service request (1) is activated for 10 seconds.
   Fig 3: Identifying Ignition Switch Positions

   Courtesy of DAIMLERCHRYSLER CORP.
3. During the 10 seconds the FSS service request is displayed, move the ignition switch to the "OFF" position (1). The FSS service request will continue to be displayed.
   Fig 4: Identifying Instrument Cluster Gauges And Control Dials

   Courtesy of DAIMLERCHRYSLER CORP.
4. Press the reset button (3) for the trip odometer (1) and hold.
   Fig 5: Identifying Ignition Switch Positions

   Courtesy of DAIMLERCHRYSLER CORP.
5. Move the ignition switch to the "RUN" position (3).
   Fig 6: Identifying Flexible Service System Indicator & Mileage Display

   Courtesy of DAIMLERCHRYSLER CORP.
6. Continue to press and hold the reset button for the trip odometer (about 10 seconds) until the audible signal sounds and the new start distance appears (1) in the display.
7. The tool symbol (2) should disappear at this time.