LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire SRT-6, 2D Coupe >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Instrument Cluster - Service Information >> Removal >> Removal - RHD

Removal - RHD

Fig 1: Removing/Installing Lower Instrument Panel Cover
GC0035208Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove the steering wheel. (Refer to STEERING/COLUMN/STEERING WHEEL - REMOVAL) .
  3. Remove the lower Instrument Panel cover. (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL ASSEMBLY - REMOVAL) .
    Fig 2: Removing/Installing Instrument Cluster Bezel
    GC0032393Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the Instrument Cluster bezel (1). (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL ASSEMBLY - REMOVAL) .
  5. Remove the retaining screws from Instrument Cluster.
  6. Move the Instrument Cluster toward the rear of the vehicle.
  7. Unlock and disconnect the Instrument Cluster harness connectors from the back of the Instrument Cluster.
  8. Remove the Instrument Cluster from the vehicle.
scientia non olet · About LEMON Manuals