LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire SRT-6, 2D Coupe >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Instrument Cluster - Service Information >> Removal >> Removal - Instrument Cluster

Removal - Instrument Cluster

Fig 1: Removing/Installing Instrument Cluster
GC0035206Courtesy of DAIMLERCHRYSLER CORP.
Fig 2: Removing/Installing Lower Instrument Panel Cover
GC0032410Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove the steering wheel. (Refer to STEERING/COLUMN/STEERING WHEEL - REMOVAL) .
  3. Remove the lower instrument panel cover (2).
    Fig 3: Removing/Installing Lower Instrument Panel Cover
    GC0032376Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the Instrument Cluster outer bezel (1).
    NOTE: To ease the removal of the Instrument Cluster outer bezel, carefully pry the bezel from the top edge to disengage the retaining tabs from the Instrument Panel.
  5. Remove the retaining screws from Instrument Cluster.
  6. Rotate the Instrument Cluster away from the Instrument Panel.
  7. Disconnect the Instrument Cluster harness connectors from the back of the Instrument Cluster.
  8. Remove the Instrument Cluster from the vehicle.
scientia non olet · About LEMON Manuals