LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Electrical >> Gauges >> Interior & Exterior - Electrical Diagnostics >> Convertible Top >> DTC Troubleshooting >> DTC 9012: Stop Mode Longer Than 10 Minutes

DTC 9012: Stop Mode Longer Than 10 Minutes

Fig 1: Power Top Control Module Communication Circuit Schematic
GC0033023Courtesy of DAIMLERCHRYSLER CORP.
  1. 1)  DTC Present in the Power Top Control Module (PTCM) 
    Fig 2: Connecting Scan Tool & Turning Ignition On
    GC0032455Courtesy of DAIMLERCHRYSLER CORP.

    This is an informational DTC reporting that the Convertible Top was sitting idle in a mid position for more than 9 minutes.

    Turn the Ignition off and manually lower the Convertible Top into the cargo compartment so the Power Top Control Module can relearn the location of the top.

    Erase this DTC from the PTCM after any other PTCM DTC(s) have been repaired.

    PTCM Diagnostic Information complete. 

    Continue 

    1. Test Complete.