Test 46A: No PCI Transmission

WARNING: This page is about a different variant/trim than selected.

NOTE: Prior to performing any air bag system test, go to PRETEST INSPECTION & DIAGNOSTIC PROCEDURE under DIAGNOSTICS. Perform TEST VER-1: AIR BAG VERIFICATION TEST after all repairs unless otherwise directed.

Turn ignition switch to ON position. Using DRBIII, determine if NO PCI TRANSMISSION is an active or stored Diagnostic Trouble Code (DTC). If NO PCI TRANSMISSION is active DTC, replace Occupant Restraint Controller (ORC). See OCCUPANT RESTRAINT CONTROLLER (ORC) under REMOVAL & INSTALLATION. If NO PCI TRANSMISSION is a stored DTC, go to TEST 1B: REPAIRING STORED CODES .