Center Floor Console: Removal
- Raise parking brake lever as high as possible.
- Move transmission shifter to Neutral position.
- Loosen set screw on front of shift lever knob and remove shift lever knob.
- Remove lighted transmission range indicator letter bezel. See Fig 1.
- Disconnect transmission range indicator bezel wire connector at the shifter mechanism.
- Remove screw, next to floor shifter and in console storage compartment, attaching floor console to brackets on floor pan. See Fig 2.
- Disconnect wire connector for floor console accessories at floor pan.
- Remove console from vehicle.
NOTE:
The grip portion of the parking brake lever will only fit through the wider lower portion of the slot in the floor console.