Right Lower Instrument Panel Trim: Removal
- Disconnect and isolate the battery negative remote cable.
- Remove one screw to shift knob and transmission range indicator bezel from floor console.
- Remove floor console (Refer to FLOOR CONSOLE ).
- Remove instrument panel kick shield (Refer to KICK SHIELD ).
- Remove right and left instrument panel end cover.
- Remove left lower instrument panel trim (Refer to LEFT LOWER INSTRUMENT PANEL TRIM ).
- Remove instrument panel center bezel (Refer to INSTRUMENT PANEL CENTER BEZEL ).
- Remove instrument panel inboard bezel and outboard bezel (Refer to INSTRUMENT PANEL INBOARD BEZEL and INSTRUMENT PANEL OUTBOARD BEZEL .
- Remove right instrument panel trim bezel (Refer to RIGHT INSTRUMENT PANEL TRIM BEZEL ).
- Remove instrument panel cluster bezel (Refer to INSTRUMENT PANEL CLUSTER BEZEL ).
- Remove CD changer Trim Bezel, CD player, and CD support bracket (if equipped). (Refer to CD CHANGER TRIM BEZEL ).
- Remove radio.
- Unsnap right a/c barrel and remove a/c housing.
- Remove glove box (Refer to GLOVE BOX ).
- Remove 13 screws and remove panel.
- Remove cubby bin mat (if equipped).