LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring GTC, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Except Coupe >> Right Lower Instrument Panel Trim >> Installation

Right Lower Instrument Panel Trim: Installation

  1. Install new right lower trim panel onto instrument panel beam assembly.
  2. Attach five screws around glove box opening. Note the lower right hand screw must be installed first to properly align glove box door.
  3. Attach one screw on right outboard end.
  4. Attach two screws above glove box door opening.
  5. Attach two screws below radio opening.
  6. Attach three screws along left end of panel.
  7. Install glove box assembly (Refer to GLOVE BOX  ).
  8. Install right a/c housing and attach with three screws. Note the two upper screw attachments use the pan head screws and the bottom attachment uses the hex head screw.
  9. Attach right a/c barrel.
  10. Install radio and attach.
  11. Install CD bracket, CD player, and CD trim bezel (if so equipped) (Refer to CD CHANGER TRIM BEZEL  ).
  12. Install instrument panel cluster bezel (Refer to INSTRUMENT PANEL CLUSTER BEZEL  ).
  13. Install outboard, inboard, and right trim bezels (Refer to INSTRUMENT PANEL INBOARD BEZEL INSTRUMENT PANEL OUTBOARD BEZEL  ).
  14. Install center bezel (Refer to INSTRUMENT PANEL CENTER BEZEL  )
  15. Install left lower instrument panel trim (Refer to LEFT LOWER INSTRUMENT PANEL TRIM  )
  16. Install right and left instrument panel end covers.
  17. Install instrument panel kick shield (Refer to KICK SHIELD  ).
  18. Install console assembly (Refer to FLOOR CONSOLE )
  19. Reconnect battery.
scientia non olet · About LEMON Manuals