LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring GTC, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Except Coupe >> Instrument Panel Top Cover >> Removal

Instrument Panel Top Cover: Removal

  1. Remove A-pillar trim. Using a trim stick (special tool #C-4755) or equivalent, gently pry out and remove.
  2. Using a trim stick, disengage clips holding rear edge of top cover to instrument panel (Fig 1 ).
    NOTE: The Instrument Panel Top Cover may be hard to unsnap from the instrument panel. Be sure not to mar, scuff, or damage the instrument panel pad.
    Fig 1: Identifying Instrument Panel Top Cover
    G03634500Courtesy of DAIMLERCHRYSLER CORP.
  3. Pull top cover rearward to disengage hooks holding front of top cover to instrument panel.
  4. Remove top cover from vehicle.
scientia non olet · About LEMON Manuals