LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring GTC, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Except Coupe >> Instrument Panel Outboard Bezel >> Removal

Instrument Panel Outboard Bezel: Removal

  1. Disconnect and isolate the battery negative remote cable.
  2. Using a trim stick (special tool #C-4755) or equivalent, gently pry out on the instrument panel outboard switch bezel (Fig 1 ).
    Fig 1: Identifying Instrument Panel Outboard Switch Bezel
    G03634499Courtesy of DAIMLERCHRYSLER CORP.
  3. Disconnect the wire connector.
  4. Remove bezel from vehicle.
  5. Push in the sides of the power mirror switch to release it from the bezel.
scientia non olet · About LEMON Manuals