LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring GTC, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Except Coupe >> Instrument Panel Inboard Bezel >> Removal

Instrument Panel Inboard Bezel: Removal

  1. Remove instrument panel center bezel. Refer to INSTRUMENT PANEL CENTER BEZEL  .
  2. Remove the one retaining screw located on the left side of the center stack, behind the center bezel (Fig 1 ).
    Fig 1: Identifying Instrument Panel Inboard Bezel
    G03634498Courtesy of DAIMLERCHRYSLER CORP.
  3. Using a trim stick (special tool #C-4755) or equivalent, gently pry out on the instrument panel inboard bezel and remove.
scientia non olet · About LEMON Manuals