LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring GTC, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Except Coupe >> Instrument Panel Center Bezel >> Removal

Instrument Panel Center Bezel: Removal

  1. Disconnect and isolate the battery negative remote cable.
  2. Using a trim stick (special tool #C-4755) or equivalent, gently pry out on the edge of the instrument panel center bezel and pull outward (Fig 1 ).
    Fig 1: Identifying Instrument Panel Center Bezel
    G03634495Courtesy of DAIMLERCHRYSLER CORP.
  3. Disconnect the wire connector to the HVAC control.
  4. Remove the instrument panel center bezel from the vehicle.
scientia non olet · About LEMON Manuals