LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring GTC, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster - Except Coupe >> Vacuum Fluorescent Display >> Removal

Vacuum Fluorescent Display: Removal

  1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
  2. Remove instrument cluster from vehicle. Refer to INSTRUMENT CLUSTER  .
  3. Remove six cluster back cover retaining screws and remove the cover.
  4. Carefully unplug the connector from printed circuit board.
  5. Remove six attachment screws and then remove cluster mask/lens from the instrument cluster.
  6. Carefully pull the dial assembly from the housing to separate connection with the PC-board.
  7. Remove two screws from the back of the dial assembly to remove the VF-display.
  8. Remove the VF-display from the cluster.
scientia non olet · About LEMON Manuals