LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring GTC, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster - Except Coupe >> Vacuum Fluorescent Display >> Installation

Vacuum Fluorescent Display: Installation

  1. Position the VF-display onto the dial assembly and install the two screws.
  2. Carefully push the dial assembly into the housing to make the connection with the PC-board.
  3. Install the six attachment screws and then install cluster mask/lens to the instrument cluster.
  4. Carefully plug the connector into the printed circuit board.
  5. Install the cover and the six cluster back cover retaining screws.
  6. Install the instrument cluster into vehicle. Refer to INSTRUMENT CLUSTER  .
  7. Connect the negative battery cable remote terminal to the remote battery post.
scientia non olet · About LEMON Manuals