LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Sebring GTC, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Except Coupe >> Instrument Panel Cluster Bezel >> Removal

Instrument Panel Cluster Bezel: Removal

  1. Disconnect and isolate the battery negative remote cable.
  2. Remove left end cover.
  3. Using a trim stick (special tool #C-4755) or equivalent, gently pry up on the power mirror switch.

    Disconnect the switch and remove.

  4. Using a trim stick or equivalent, gently pry up on instrument panel center trim bezel.
  5. Disconnect the HVAC control connector.
  6. Remove one screw from the trim bezel to the right of the steering column and remove trim by unsnapping clips.
  7. Remove the one screw from the passenger side trim bezel and remove trim by unsnapping clips.
  8. Remove five screws to left lower instrument panel trim.
  9. Remove the four screws to the cluster bezel (Figure ). Using a trim stick or equivalent, gently pry out the cluster bezel.
  10. If the vehicle is equipped with a Compass Mini-Trip Computer (CMTC/Traveler), disconnect the module and then remove the cluster bezel assembly.
scientia non olet · About LEMON Manuals