LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Body Diagnostic Procedures - Adjustable Pedals, Airbag, Audio, Chime >> Diagnostic Information And Procedures >> Audio >> Symptom: EQ FAULT - NO EQ ACTIVE - AMPLIFIER >> Diagnostic Procedure

Diagnostic Procedure

EQ FAULT - NO EQ ACTIVE - AMPLIFIER - DIAGNOSTIC PROCEDURE

TEST ACTION APPLICABILITY
1
NOTE: The fault condition must be present to continue diagnosis. Use the DRBIII® to perform the Amplifier pretest to verify the fault condition is present before continuing diagnosis.
Turn the ignition on.With the DRBIII®, perform the Amplifier pretest.Is the fault condition present?
  1. Yes: Replace the Amplifier in accordance with the Service Information.

    Perform BODY VERIFICATION TEST VER-1 .

  2. No: Refer to SCHEMATIC DIAGRAMS to help isolate a possible intermittent condition.

    Perform BODY VERIFICATION TEST VER-1 .

 All
scientia non olet · About LEMON Manuals