Diagnostic Procedure
ANTENNA HARDWARE FAILURE - SDARS - DIAGNOSTIC PROCEDURE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 |
NOTE:
Before Continuing: Disconnect the Satellite Receiver harness connector and check the related wiring terminals for corrosion, damage or terminal push out. Repair as necessary.
NOTE:
Before Continuing: Disconnect the Satellite Receiver Antenna harness connector and check the related wiring terminals for corrosion, damage or terminal push out. Repair as necessary. Using the schematics as a guide, inspect the wire harness and connectors. Pay particular attention to all Power and Ground circuits.Check the Antenna assembly for physical damage.If there are no other possible causes, view repair.
|
All |