Diagnostic Procedure
*AIRBAG INDICATOR ON WITHOUT ACTIVE TROUBLE CODES - DIAGNOSTIC PROCEDURE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 |
NOTE:
Ensure the battery is fully charged. Turn the ignition on.Make sure that all active DTC's have been repaired before performing this procedure.With the DRBIII® select the PASSIVE RESTRAINTS, AIRBAG, MONITOR DISPLAY and read the WARNING LAMP STATES.With no active DTCs, Does the LAMP REQ by ACM monitor show ON?
NOTE:
When reconnecting Airbag system components, the ignition must be turned off and the battery must be disconnected.
|
All |