LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures - HVAC, Ignition Power Accessory, Instrument Cluster, Interior Lighting, Navigation, Overhead Console, Power Door Locks/RKE >> Overhead Console >> Symptom: BCM MESSAGES NOT RECEIVED >> Diagnostic Procedure

Diagnostic Procedure

BCM MESSAGES NOT RECEIVED - DIAGNOSTIC PROCEDURE

TEST ACTION APPLICABILITY
1 With the DRBIII®, attempt to communicate with the BCM.
Was the DRBIII® able to communicate with the BCM?
  1. Yes: With the DRBIII®, erase DTCs. Turn the ignition off, wait 10 seconds, then turn the ignition on. With the DRBIII®, read DTCs. If this code resets, replace the Overhead Console in accordance with the Service Information.

    Perform BODY VERIFICATION TEST VER-1 .

  2. No: Refer to 10.6 COMMUNICATION for the related symptom(s).

    Perform BODY VERIFICATION TEST VER-1 .

All