Diagnostic Procedure
TCM MESSAGES NOT RECEIVED - DIAGNOSTIC PROCEDURE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | With the DRBIII®, erase DTCs. Cycle the ignition switch from on to off and then back to on Turn the Navigation System on and try to select a location. With the DRBIII®, read DTCs. Does the DRBIII® display TCM MESSAGES NOT RECEIVED?
|
All |
| 2 |
NOTE:
Diagnose and repair any TCM DTCs before proceeding with this test. Turn the ignition on, engine not running.With the DRBIII®, monitor the Park/Neutral Position Switch input state.Move the gear selector through all gear positions.Does the DRBIII® display Park/Neutral and Drive/Reverse in the correct gear positions?
|
All |