Diagnostic Procedure
DISC READ ERROR - DIAGNOSTIC PROCEDURE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | With the DRBIII®, erase DTCs. Cycle the ignition switch from on to off and then back to on Turn the Navigation System on and try to select a location. With the DRBIII®, read DTCs. Does the DRBIII® display DISC READ ERROR?
|
All |
| 2 |
NOTE:
Ensure the navigation unit has not been subjected to extreme temperatures. Install a known good disc and turn Navigation on and select a location.Did the Navigation System respond correctly?
|
All |