LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures - HVAC, Ignition Power Accessory, Instrument Cluster, Interior Lighting, Navigation, Overhead Console, Power Door Locks/RKE >> Instrument Cluster >> Symptom: RIGHT TURN SIGNAL INDICATOR SHORT - BCM >> Diagnostic Procedure

Diagnostic Procedure

RIGHT TURN SIGNAL INDICATOR SHORT - BCM - DIAGNOSTIC PROCEDURE

TEST ACTION APPLICABILITY
1 Turn the ignition off.
Disconnect the BCM C4 harness connector.
Turn the ignition on.
With the DRBIII®, erase DTCs.
Does the RIGHT TURN SIGNAL INDICATOR SHORT reset?
  1. Yes: Replace the BCM in accordance with the Service Information.

    Perform BODY VERIFICATION TEST VER-1 .

  2. No: Go To 2
 All
2 Turn the ignition off.
Disconnect the BCM C4 harness connector.
Disconnect the Instrument Cluster C1 harness connector.
Measure the resistance between ground and the Right Turn Signal circuit.
Is the resistance below 5.0 ohms?
  1. Yes: Repair the Right Turn Signal circuit for a short to ground.

    Perform BODY VERIFICATION TEST VER-1 .

  2. No: Replace the Instrument Cluster in accordance with the Service Information.

    Perform BODY VERIFICATION TEST VER-1 .

 All
scientia non olet · About LEMON Manuals