Diagnostic Procedure
LEFT TURN SIGNAL INDICATOR SHORT - BCM - DIAGNOSTIC PROCEDURE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | Turn the ignition off. Disconnect the BCM C4 harness connector. Turn the ignition on. With the DRBIII®, erase DTCs. Does the LEFT TURN SIGNAL INDICATOR SHORT reset?
|
All |
| 2 | Turn the ignition off. Disconnect the BCM C4 harness connector. Disconnect the Instrument Cluster C1 harness connector. Measure the resistance between ground and the Left Turn Signal circuit. Is the resistance below 5.0 ohms?
|
All |