LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures - HVAC, Ignition Power Accessory, Instrument Cluster, Interior Lighting, Navigation, Overhead Console, Power Door Locks/RKE >> Heating & A/C >> Symptom: VEHICLE ODOMETER MESSAGE MISSING (ACTIVE) >> Diagnostic Procedure

Diagnostic Procedure

VEHICLE ODOMETER MESSAGE MISSING (ACTIVE) - DIAGNOSTIC PROCEDURE

TEST ACTION APPLICABILITY
1 Turn the ignition on.
With the DRBIII®, read the active ATC DTCs.
Does the DRBIII® display: NO COMMUNICATION WITH BCM?
  1. Yes: Return to the Heating & A/C SYMPTOM LIST and choose the symptom.

    Perform BODY VERIFICATION TEST VER-1 .

  2. No: Go To 2
 All
2 Turn the ignition on.
With the DRBIII®, read BCM DTCs.
Does the DRBIII® display any DTCs?
  1. Yes: Refer to the appropriate category for the related symptom(s).

    Perform BODY VERIFICATION TEST VER-1 .

  2. No: Go To 3
 All
3 Turn the ignition on.
With the DRBIII® in ATC, Monitor Display, PCI Bus Messages, look for the following message:
"ODO MSG PRESENT:"
Does the DRBIII® display: ODO MSG PRESENT: YES?
  1. Yes: Replace the Automatic Temperature Control ATC in accordance with the Service Information.

    Perform BODY VERIFICATION TEST VER-1 .

  2. No: Replace the Body Control Module (BCM) in accordance with the Service Information.

    Perform BODY VERIFICATION TEST VER-1 .

 All
scientia non olet · About LEMON Manuals