Diagnostic Procedure
REAR BOOSTER FAN RELAY OPEN - DIAGNOSTIC PROCEDURE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | Turn the ignition off. Remove the Rear Booster Fan Relay from the IPM. Using a 12-volt test light connected to ground, probe cavity 85 of the rear booster fan relay connector. Is the test light illuminated?
|
All |
| 2 | Turn the ignition off. Install a substitute relay in place of the existing Rear Booster Fan Relay. Turn the ignition on. With the DRBIII®, erase DTCs. Turn the ignition off. With the DRBIII®, read IPM DTCs. Does the DRBIII® display: REAR BOOSTER FAN RELAY OPEN?
|
All |