LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures - HVAC, Ignition Power Accessory, Instrument Cluster, Interior Lighting, Navigation, Overhead Console, Power Door Locks/RKE >> Heating & A/C >> Symptom: PAS FRONT DOOR MESSAGE MISSING (ACTIVE) >> Diagnostic Procedure

Diagnostic Procedure

PAS FRONT DOOR MESSAGE MISSING (ACTIVE) - DIAGNOSTIC PROCEDURE

TEST ACTION APPLICABILITY
1 Turn the ignition on.
With the DRBIII®, read the active ATC DTCs.
Does the DRBIII® display: NO COMMUNICATION WITH PDM?
  1. Yes: Return to the Heating & A/C SYMPTOM LIST and choose the symptom.

    Perform BODY VERIFICATION TEST VER-1 .

  2. No: Go To 2
All
2 Turn the ignition on.
With the DRBIII®, read PDM DTCs.
Does the DRBIII® display any DTCs?
  1. Yes: Refer to the appropriate category for the related symptom(s).

    Perform BODY VERIFICATION TEST VER-1 .

  2. No: Go To 3
All
3 Turn the ignition on.
With DRBIII® in ATC, Monitor Display, PCI Bus Messages, look for the following message:
"RT FR DOOR AJAR SW:"
Is "NO RESPONSE" displayed after this message?
  1. Yes: Replace the Passenger Door Module (PDM) in accordance with the Service Information.

    Perform BODY VERIFICATION TEST VER-1 .

  2. No: Replace the Automatic Temperature Control (ATC) in accordance with the Service Information.

    Perform BODY VERIFICATION TEST VER-1 .

All