Diagnostic Procedure
*OUTSIDE AIR TEMPERATURE DISPLAY INACCURATE OR INOPERATIVE - DIAGNOSTIC PROCEDURE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 |
NOTE:
The Outside Air Temp (OAT) display can be activated and deactivated by pressing the Outside Temp button on the ATC.
NOTE:
Anytime the vehicle is turned off for more than 2 hours, the Outside Air Temp (OAT) display will update instantly upon ignition on.
NOTE:
If the vehicle is turned off for less than 2 hours & the outside air temp increases, the OAT display may display a value that is colder than the actual outside air temp.
NOTE:
If the vehicle is driven for an extended time below 20 mph, the OAT display will not update for warmer outside air temps. If after this extended time the vehicle speed is increased to above 50 mph, the OAT display may display an erroneous value. Turn the ignition on.With the DRBIII®, read the active ATC DTCs.Does the DRBIII® display any DTCs?
|
All |
| 2 | Turn the ignition on. With the DRBIII®, read PCM DTCs. Does the DRBIII® display any DTCs?
|
All |