Diagnostic Procedure
*LIFTGATE DOOR AJAR CIRCUIT SHORT TO GROUND - DIAGNOSTIC PROCEDURE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | With the DRBIII® in Inputs/Outputs, read the LIFTGATE AJAR SW state. Disconnect the Liftgate Ajar Switch (Liftgate Cinch/Release Motor) harness connector. With the DRBIII® in Inputs/Outputs, read the LIFTGATE AJAR SW state. Does the Switch State change from CLOSED to OPEN?
|
All |
| 2 | Disconnect the BCM C3 harness connector. Disconnect the Liftgate Ajar Switch (Liftgate Cinch/Release Motor) harness connectors. Using a 12-volt Test Light connected to 12-volts, check the Sense circuit. Does the Test Light illuminate?
|
All |