Diagnostic Procedure
RADIO MODULE MESSAGE RESPONSE FAULT - DIAGNOSTIC PROCEDURE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | Turn the ignition on. With the DRBIII®, attempt to communicate with the radio. Was the DRBIII® able to I/D or communicate with the radio?
|
All |
| 2 | With the DRBIII®, erase DTC's. Cycle the ignition switch from off to on. Reset the memory positions. Operate the memory system. With the DRBIII®, read DTC's. Did this DTC reset?
|
All |