Diagnostic Procedure
MSM MESSAGES NOT RECEIVED - DIAGNOSTIC PROCEDURE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | Turn the ignition on. With the DRBIII®, attempt to communicate with the Memory Seat Module. Was the DRBIII® able to I/D or communicate with the MSM?
|
All |
| 2 | With the DRBIII®, erase DTC's. Operate the memory seat system. Cycle the ignition switch from off to on and wait approximately 1 minute. With the DRBIII®, read DTC's. Did this DTC reset?
|
All |