LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Sebring LXi, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures - Except Coupe >> Diagnostic Information And Procedures >> Heating & A/C >> Symptom: BLEND DOOR STALL TEST FAILURE >> Possible Causes

Possible Causes

  1. BLEND DOOR ACTUATOR
  2. BLEND DOOR DRIVER CIRCUIT OPEN BETWEEN THE BCM AND C200
  3. BLEND DOOR DRIVER CIRCUIT OPEN BETWEEN THE C200 AND ACTUATOR
  4. BLEND DOOR DRIVER CIRCUIT SHORTED TO GROUND BETWEEN C200 AND THE ACTUATR
  5. BLEND DOOR DRIVER CIRCUIT SHORTED TO GROUND BETWEEN THE BCM AND C200
  6. COMMON DOOR DRIVER CIRCUIT OPEN BETWEEN THE BCM AND C200
  7. COMMON DOOR DRIVER CIRCUIT OPEN BETWEEN THE C200 AND ACTUATOR
  8. COMMON DOOR DRIVER CIRCUIT SHORTED TO GROUND BETWEEN THE BCM AND C200
  9. COMMON DOOR DRIVER CIRCUIT SHORTED TO GROUND BETWEEN THE C200 AND ACTUATOR
  10. WIRING HARNESS INSPECTION
  11. BODY CONTROL MODULE
scientia non olet · About LEMON Manuals