LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Limited, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Glove Box >> Installation

Glove Box: Installation

  1. Place glove box assembly in position and make sure the orientation of the hinge is correct and rotate glove box assembly hinge into place (Fig 1 ).
    Fig 1: Identifying Glove Box Assembly Hinge
    G02664055Courtesy of DAIMLERCHRYSLER CORP.
  2. Lift glove box assembly up, push in on the box/bin sides to allow the glove box to pass by the instrument panel (Figure ).
  3. Close glove box.
  4. Shut passenger door.
scientia non olet · About LEMON Manuals