LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Limited, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock Brakes >> Chassis Diagnostic Procedures - Anti-Lock Brake System >> Diagnostic Information And Procedures >> Brakes (Cab) - Symptoms >> Symptom: CLUSTER FAILURE >> Diagnostic Procedure

Diagnostic Procedure

CLUSTER FAILURE

TEST ACTION APPLICABILITY
1 With the DRBIII®, erase DTCs.
With the DRBIII®, read DTCs.
Does the DRBIII® display Cluster Failure?
  1. Yes --> Replace the Instrument Cluster in accordance with the Service Information.

    Perform ABS VERIFICATION TEST - VER 1 .

  2. No --> Go To 2
 All
2 Turn the ignition off.
Visually inspect the related wiring harness. Look for any chafed, pierced, pinched, or partially broken wires.
Visually inspect the related wire harness connectors. Look for broken, bent, pushed out, or corroded terminals.
Refer to any Hotline letters or Technical Service Bulletins that may apply.
Were any problems found?
  1. Yes --> Repair as necessary.

    Perform ABS VERIFICATION TEST - VER 1 .

  2. No --> Test Complete.
 All
scientia non olet · About LEMON Manuals