LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Limited, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Exterior >> Exterior Name Plates >> Removal >> Removal - BADGING/Tape

Removal - BADGING/Tape

  1. Mark reference points before removing.
  2. Using a heat gun gently apply heat in a circular motion to loosen the adhesive bond.
  3. With your fingernail lift up and peel away badging/tape from panel, using a heat gun as you go.
  4. Clean off all traces of adhesive from the panel (s) with a general purpose adhesive remover.
scientia non olet · About LEMON Manuals